RESIN WINDOWS ASSEMBLY & TIPS

Please read these instructions completely before building. We recommend using GEL SUPER GLUE for best results when gluing models, as the material in some places is porous, and it is the type of glue that works best.  Dry-fit parts together before gluing to get the best results. You may need a hobby knife as well in some cases.

The resin windows can be added to buildings by gluing in various ways...

These are the resin windows.There may be different types, but they will basically be the same in function.

If adding to walls that already have windows in them, cut away the tabs as seen above to remove the laser cut windows and add the resin windows.

The walls will have to have an opening as above to add the resin windows.

You can also get shutters as above to add to the sides of the windows for further detail to the windowed area.

The windows can be glued into the openings with the frame outside to show the frame on the outside wall.

If you wish to add shutters to the windows then gluing them inside the wall will work best as the shutters can be added by simple gluing them on the sides of the windows in the next picture.

This is an example of shutters being added to the resin-windowed wall.