FACTORY PARTS IDENTIFICATION & INSTRUCTIONS
FACTORY PARTS SHEET #1 - MAIN FACTORY BUILDING SECTION
Comes with the following parts:
A - Side wall w/door (door can be cut out to be opened or closed & by cutting it out you can use the grey side on the outside wall.
B - Side wall w/medium door opening
C - 2 x Upper top side walls w/skylight window openings
D - Building base (Keyed)
E - Rear Factory Building wall w/doorway
F - Wall strip (to be glued just above the door opening)
G - Front Factory wall w/doorway
H - Front wall bricked doorway frame (to be attached as outlined to the front wall doorway)
The Main Factory Building section is keyed as it goes together one way for the factory. These parts make the complete 1st Factory building section. The skylights upper wall sections are not keyed so that you may glue some of the ruined walls (Sheet #3) to the top instead of the room and make it partially ruined. 
FACTORY PARTS SHEET #2 - ADDITIONAL FLOOR & ROOF SECTION
Comes with the following parts:
A - Main Factory Roof section (to go on top of the Main Factory Building, rest of the Skylight Walls)
B - Base Floor for the additional Factory section (meant to be on the side of the Main Factory building section with ruined walls)
This (the Base Floor section) is meant to be at the side of the Main Factory building located on the side where the medium door opening is located. This floor is NOT keyed because it is meant to allow you to glue the ruined wall sections as you wish. You can see pictures of the Factory Buildings assembled in the product listings for some ideas as to how you would like to build your ruined additional section.
FACTORY PARTS SHEET #3 - SMALL RUINED WALL SECTIONS
Comes with the following parts:
Numerous small, ruined wall sections (these ruined walls may be added anywhere you would like to represent a fallen/ruined wall in your factory (see assembled factory buildings in the product listings for ideas). You can even make them taller by gluing smaller wall sections on top of each other. We tried to give way more than enough examples to give MANY different options, so if you have some left over, no worries. You could use them to make even more ruins for your factory table by acquiring additional smaller building bases!
FACTORY PARTS SHEET #4 - LARGE RUINED WALL SECTIONS
Comes with the following parts:
7 X larger ruined wall sections
Large ruined wall sections are great for the corners of the ruined Factory Building section or even large internal ruined walls. You can even make them taller by gluing smaller wall sections on top of them. But as before, add these ruined walls anywhere you would like to represent a fallen/ruined wall in your factory (see assembled factory buildings in product listings for ideas). 
FACTORY PARTS SHEET #5 - FACTORY PLAIN WALL SECTIONS
Comes with the following parts:
6 X Plain wall sections
Plain bricked walls to add whereever you would like to further personalize your factory buildings.
FACTORY PARTS SHEET #6 - EXTENDED ROOF SECTION
Comes with the following parts:
2 X Extended roof sections front/back
2 x Extended roof sections sides
1 x Extended roof section roof
Once assembled, this is meant to add to the rooftop of your Factory Main Building.
FACTORY PARTS SHEET #7 - FACTORY STAIRS & WALKWAY
Makes Stairs & Walkway when complete.
Comes with the following parts:
A - 2 X Gantry Stairs frame
C - Top of stairs platform
G - 7 x Stairs for stairs
E - Stairs guard rail (made to go on either side of stairs once complete)
D - Walkway platform
B - 2 x Guard rails for walkway platform (D)
F - Platform legs to mount Walkway (D)
FACTORY PARTS SHEET #8 - LARGE FACTORY METAL DOORS
Comes with the following parts:
2 Sets of large Factory metal doors (one for the front & back of the Factory main building section)
You can just glue them into place or "wedge" them into place so you can have them open or closed.
FACTORY PARTS SHEET #9 - MEDIUM FACTORY METAL DOORS
Comes with the following parts:
2 X Medium Factory Metal Doors (goes into the door opening in the side wall to open to the additional factory ruined section)
You can just glue them into place or "wedge" them into place so you can have them open or closed.
FACTORY PARTS SHEET #10 - LARGE FACTORY WIDOW INSERTS
Comes with the following parts:
6 X Factory Window Inserts (for the Skylight upper walls for the factory Main Building section)
Glue these into the upper wall sections for the Factory Main Building section and then to the sidewalls of the Factory.
FACTORY PARTS SHEET #11 - DESTROYED FURNACE W/CHIMNEY
2 X Sheets to build the Destroyed Furnace w/Chimney.
The pieces go together as they are in the sheet, just glue it into a box shape as it appears. The furnace is to be glued onto a base (as seen in the picture) aside the complete Furnace. The two furnace bases are included with the kit. Also the Factory rubble is included with factory so you can add rubble as in the picture.
FACTORY PARTS SHEET #12 - COMPLETE FURNACE W/CHIMNEY
2 X Sheets to build the Complete Furnace w/Chimney.
A - 1 x Resin Chimney topper
The pieces go together as they are in the sheet. Just glue it into a box shape as it appears. The furnace it to be glued onto a base (as seen in the picture) aside the destroyed Furnace. The two furnace bases are included with the kit.
FACTORY PARTS SHEET #13 - COMPLETE & DESTROYED FURNACE BASES
2 X Factory Furnace bases
These two bases are for the Complete & Destroyed Factory Furnace sets
FACTORY PARTS SHEET #14 - Factory Generators
2 X Factory Generators
The Generators can be added anywhere in the Factory as you wish, however they were made to go into the Factory additional ruined section. See the Factory Furnace Building pictures for ideas on how to add yours to your factory.
FACTORY PARTS SHEET #15 - FACTORY BRICK PILES (Large & small)
5 X Factory Large Brick piles (randomly selected)
20 x Factory Smaller Brick piles (randomly selected)
The Brick piles are randomly selected. Each Factory set that includes them will receive 5 total larger brick piles and approx. 20 smaller brick piles to further add detail to your factory.
FACTORY PARTS - BAG-O-FACTORY RUBBLE
1 x Bag-O-Factory Rubble
The Bag-O-Factory Rubble is to give you the ability to add factory anywhere in and around your Factory! This will blend the Factory buildings together (see pictures of Factory ruins sections).