CHIMNEY ASSEMBLY

Please read these instructions completely before building. We recommend using a GEL SUPER GLUE for best results when gluing this model as the material in some places is porous, and it is the type of glue that works best.  Dry-fit parts together before gluing to get the best results. You may need a hobby knife as well in some cases to clean parts.

Chimneys will be in different sizes and variations such as sitting on top of the roof or on the side, but the construction is similar in all cases. You will get four laser-cut pieces and a resin top.

These are the chimney parts which will be similar in most cases, having the four laser cut parts and a resin top.

Add glue to each tab. Starting with the larger piece as above seems to work best.

Gently press the parts into each tabbed area that you are gluing and let dry.

Repeat with the other parts until complete as shown above.

Repeat for the last part of the chimney.

Lower section complete.

 Glue the top of the chimney on.

Once dry, add it to your house/building as above.