WOODEN FENCE ASSEMBLY & MODELING TIPS

Please read these instructions completely before building. We recommend using a GEL SUPER GLUE for best results when gluing this model as the material in some places is porous, and it is the type of glue that works best.  Dry-fit parts together before gluing to get the best results. You may need a hobby knife as well in some cases.

SHEET #1 - WOODEN FENCE SET

7 X Wooden fence sections (4” wide x 1” tall)
2 x Wooden half fence sections (2” x 1”)
2 x Gate sections (1 1/2” x 1”)
10 x Wooden posts 1/4” x 1.1/8”)

BONUS! - 21 thick card appropriate-sized bases for all of the walls & gates included.

Locate a 4” wall section and 4”
 base for it. Run a bead of glue in the center of the bases, end to end, and glue the wall in the exact center of the base as shown above.

Once glued in the center, let dry. Repeat for every wall & gate in the Wooden Fence set with their appropriate base.

Next locate one of the wooden fence posts and glue into the center of its base as above.

Repeat with the rest of the posts until all of them are complete as above.

The models were sprayed with a dark brown and the “mist” (light spray) of a tan. Then they were stained with various browns & sepia.

Then we lightly dry-brushed to bring out the wood grain. The bases were then flocked and tufts added for further detail.

Note: As shown above, when placing them on the table, you may place the walls/gates on top of the post base so they can connect as you wish.

And here are some of the finished walls for the game table!

Here they are with a miniature next to them. These are great for game enhancement!

As you can see, once they are done they look great!